Scanning Hot Metal Detector Rota-Sonde DC4500 DELTA


DELTA, worldwide reference in optical sensors and measuring gauges designed for steel mill automation, introduces… a new Hot Metal Detector (HMD) with scanning principle, for accurate detection Accurate detection thanks to the scanning principle When the level of signal overpass the threshold, the Product Presence output is activated Fast response time: 1 ms Bargraph and potentiometer The green LED on the left bargraph indicates the level of signal. The blue LED on the right bargraph indicates the setup of the threshold Adjust potentiometer to keep enough detection margin High sensitivity N range: detection starting from 400°C H range: detection starting from 180°C Red laser line Dedicated button to switch ON or OFF the laser line The laser line corresponds exactly to the detection field Easy selection of shutter Shutter 2 mm: for most of the applications Shutter 0.7 mm: for high T° applications or with hot background or for higher accuracy Shutter removed: for low T° applications Easy switch between 2 mm and 0.7 mm shutter Draw latch on hood Easy access to clean the window glass Flip cover Easy access to the back panel thanks to the flip cover Diagnostic Push 3 secondes on the ‘test’ button to initiate a test of the sensor The Control output informs about too low detection margin The Alarm output informs about an internal failure Easy maintenance Accessories Junction box CR4500DC for remote setup and diagnostic of the sensor Stainless steel heat shield to protect sensor from direct radiations. More information: www.deltasensor.eu

3 Comments

Add a Comment

Your email address will not be published. Required fields are marked *